K & M Services

An improvement to the already "best" tool available. Now (2) tools - (A) for cal .17 thru 6mm - because of the high interest in the cal .20's. (3 flutes.) (B) Enlarged to include the .338 - used for 6mm to .338. (6 flutes). Both have a centering guide rod that goes through the flash hole to keep case in "perfect" alignment to give a perfect uniform chamfer. Eliminate the worry of keeping tool and case in proper alignment.
To Order, Click on the Item Number.

K & M Flash Hole Uniformer

Bench Rest Shooters have been uniforming flash holes since 1969. In cartridge manufacturing, the flash hole is "punched" into the brass; and thus, are of different sizes and shapes. The most detrimental to accuracy are the irregular "breakouts" and "burrs" on the inside - causing "shot to shot" differences in primer "flame fronts", inconsistent pressure/velocity and thereby loss of accuracy. With the precision K & M Uniformer you simultaneously "ream", "de-burr", and "chamfer" the inside of the flash hole. The unique feature of the K & M tool is that it provides uniformity with a "pre-set" depth stop surrounding the steel cutter; it does not require the cases to be trimmed to a uniform length. Operation is controlled in reference to inside-bottom of the case, not case mouth. A "reversible" sliding "centering cone" is supplied to keep the case aligned and centered during the uniforming operation. The sliding cone is reversible to accept all pistol and rifle brass from calibers .22 through .458, including the very short .25 ACP through the large .460 Weatherby Magnum. These tools are designed with hand power in mind.
To Order, Click on the Item Number.

Undoubtedly the tool with the best resolution of adjustment of all tools on the market. Outside neck turning (hand lathe) is far superior to any form of inside reaming as a reamer would tend to follow the off center hole. The K & M tool is simple to use, it can easily be adjusted to remove the desired amount of brass from the thick side to clean up and equal the thin side or the tool can be adjusted to cut down to the desired dimension. Tolerance can be held to .0001” very easily – the adjustment is compound thread that is equal to 440 turns to the inch instead of the usual 40. (Note – even a micrometer only has 40 turns to the inch.) Index marks are provided to assist its adjustment. Special ground with angles unique to cutting brass. The case holder uses Lee auto prime shell holders for the different calibers. The shell holder clamps the case in the hex drive power adapter so it can be powered by a low speed drill or cordless screwdriver, or the power adapter can be put into a handle (provided) to be hand operated.
To Order, Click on the Item Number.

K & M has specially designed a new carbide mandrel that has four flutes for removing the "dough-nut" that is located at the neck-shoulder junction of a case. Removing this extra material aids in a consistent high volume flow of powder gas. A small difference in the shape and diameter of the hole makes a huge difference in performance. This new carbide mandrel will also cut the extra material out of this area if you have changed the neck to a different caliber. This mandrel works while you neck turn, so you will not have to perform a separate operation.
To Order, Click on the Item Number.

The K & M Expandiron is required for proper final neck expansion. Virgin competition brass isn’t quite ready to neck turn when you buy it and the commercial die manufacturers have no set standard for the Expander Button in their Die. Large variations from manufacturer to manufacturer and even within a given manufacturer makes it necessary to properly "size" the inside diameter before turning. Don’t be fooled by slick talk. The turning pilot cannot be used to correctly expand the neck because of the brass elasticity it will "spring" back and be too tight to properly turn the neck. The 7/8-14 adapter fits your normal press and the Expandirons are sized to be the perfect companion to the K & M Microadjustable Neck Turner. Smoothes "out" and slightly expands the case neck so the brass will spring back to the correct size needed to neck turn your brass. Each Expandiron has an adjustment screw to bottom out in the brass before the case mouth could hit the mandrel shoulder.
To Order, Click on the Item Number.

K & M Primer Deluxe Seating Tools

If you want the ultimate in a hand priming tool - the K & M primer/gauge will fill the bill. Benchrest shooters seat the primer until they “feel” it touch the bottom of the primer pocket. This precision instrument employs a dial indicator ensuring that each primer is seated at the precise depth required. Precise primer seating without this precision instrument cannot be accomplished.
To Order, Click on the Item Number.

* Flat bottom pocket for proper seating of primer * Tungsten carbide cutter for a lifetime of service 
* Hex shape body – will not roll off bench *1/4” hex drive – can be powered with cordless screwdriver or drill 
* Handle available for hand power * Doubles as best pocket cleaner * Factory set to optimum depth 
To Order, Click on the Item Number.

Home

Revised: May 08, 2008

Once fired shotgun hulls, Federal, Remington, Winchester, lead shot wads, Trapper wads, Windjammer wads, Pattern Control, Claybuster, International wads, Blanks to Supersonics,  Gualandi wads, Polywad Spreader, card wads, fiber wads, felt wads, Shotshell Cardboard boxes & labels, Tom Roster Manuals, Tight Seal, Buffer, Permatex, Loctite, Mylar, Alliant, IMR, Hodgdon, Winchester powder, Primers, CCI, Loading blocks, Pact scales, Hornady, Lyman, Lee, D-Loader, Hull saver, Aluminum Funnels, Stainless Steel Funnels, Lead Shot, Steel Shot, Copper plated Shot, Zinc plated shot, Bismuth Shot, Bismuth Ammo, Slug moulds, Steel Shot bars, Lead shot bars, Universal charge bars, Ponsness Warren Reloaders & accessories, MEC Reloaders, MEC Accessories, MEC Press, Mec Press,  Akro-Mills accessory boxes, MTM Accessory boxes, JJ boxes, Hasting choke tubes, Hasting Turkey choke tubes, Hastings barrels, Royal Choke tube wrenches, C & H mercury recoil suppressors, Jones stock adjuster, 100 Straight pad adj, Easy Feed, Morgan recoil pads, Kick Eez  recoil pads, Slick-Eez, Beartooth,  Bore Gauge, Auto Chucker, Chucker sporting clays thrower, Covey Chucker, Auto Rabbit Chucker, Oscillating Chucker, Shooting Glasses, Hearing protectors, Earplugs, Once fired Brass, Gun cases, Boyt, Bob Allen shooting pouches, Rapid Rod, Thermos Nissan, Paul Kingyon, Goose calls, Duck calls, Crow Calls, FoxPro wildlife caller, Owl decoys, Crow decoys, Videos, books, Shooting Chrony, Oxboro, Flexi Dog Leashes, Mutt Mitts, Tick Nipper, Sierra, Sierra Bullets,  Nosler, Hornady Bullets, Berger Bullets,  Sporting clays, Cleaning patches, cleaning rods, shotgun, rifle, pistol, bore brush, Cleaning mats, Rod Holders, A-zoom Snap caps,  Bore mops, Jags, Corn cob Media, Sprayway Glass Cleaner, Sprayway Lubricants, Sprayway Oven & Grill Cleaner, Sprayway crazy Clean, Sprayway Orange Citrus Crazy Clean, Sprayway Instant Shine, Sprayway Wax & Shine, Sprayway Stainless Steel Polish & Cleaner, Sprayway Auto Care Vinyl Leather Cleaner, Krieghoff Gun Pro, Hoppe’s Gun Oil, Hoppe’s #9, Hoppe’s Elite, Rem Oil, CRC Brakleen, Super Lube, B’laster Lubricants, Chapman, Accusharp Knife Sharpeners, Swarovski Binoculars, Swarovski Telescopes, Swarovski Rifle Scopes, Hydrosorbent, Minuteman Posted Signs,  Primers, Foodsaver,  Fox River Socks,  Spyker Spreader, Gracey case Trimmers,  Shooting Benches,  Butch’s Bore Shine, Shooters Choice, Kano, .410 bore, 28 ga, 16 ga, 20 ga, 12 ga, 10 ga, 8 ga, Shotshell Components, Shotshell Reloading, Shotshell Reloading Supplies, Shotshell Reloading Data, Shotshell Wads, Shotshell Primers, Shotshell Holder, Rifle Targets, Metallic Reloading, Metallic Reloading Equipment, Rifle Brass, Rilfe Bullets, Powder Funnels, Single Stage Press, Hand Reloading, Hand Reloading Presses, Progressive Reloading Press, Ammo Boxes, Reloading Books, Reloading Videos, Shooting Books, Shooting Videos, Reloading Dies, Reloading Press, Powder Measures, Powder Dispensers, Reloading Powder, Reloading Scales, Bullet Pullers, Powder Tricklers, Reloading Supplies, Reloading Data, Reloading Equipment, Reloading, Bench, Reloading Components, Reloading Bullets, Reloading Press, Reloading Presses, Reloading Dies, Mec Progressive, Mec Single Stage, Rifle Reloading, Rifle Reloading Data, Rifle Reloaders, Rilfe equipment, Rifle Reloading supplies, Rifle Reloading Data, Rifle Reloading Information, Shotgun Reloading, Shotgun Reloading Supplies, Shotgun reloaders, shotgun Reloader, Shotgun Reloading Data, Shotgun Reloading Equipment, Federal Wads, Winchester Wads, Lead Wads, Steel Wads, Claybuster Wads, Gualandi Wads, Precision Wad, Baschieri & Pellagri, Precision Reloading Card Wads, Remington Brass, Remington Bullets, Precision Reloading overpowder wads, Precision Reloading Under shot wads, Hevi-Shot, Hevi Shot, Hevi-Shot Mannuals, Buckshot, Hodgdon Powder, Alliant Powder, IMR Powder, Bihta Vuori Powder, Winchester Powder, Cleaning Rods, Precision Reloading Cleaning Rods, Birchwood Casey, Birchwood Casey Targets, Birchwood Casey Gun Care, Lock-N-Load, Lock N Load, Lock N Load AP, Lock N Load Auto Progressive, One Shot Case Lube, One Shot, One Shot Gun Cleaner & Dry Lube, One Shot, Cam-Lock, Cam-Lock Trimmer, Cam Lock, Cam Lock Trimmer, Case Feeder, Powder Measure